Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Burbank
Roof repair in Burbank costs between $425 and $1,850 for most jobs, with full shingle replacement on a 1940s-50s ranch home typically landing at $7,800 to $12,400. We serve every neighborhood from the Rancho-adjacent flats to the Verdugo foothills, including the 91505 and 91506 zip codes. Ruben Acosta leads our Roof Repair crew with a simple rule: inspect first, recommend second. Call (877) 752-3460 to schedule a free estimate before the next rain works its way under a lifted seam.
Why Sunrise Roof Repair Is Burbank’s Preferred Roof Repair Company
Burbank homeowners keep our number because we understand what this city’s housing stock actually requires. The 1940s and 1950s tract homes around Magnolia Boulevard, the ranch houses off Glenoaks, and the flat-roof commercial buildings in the Media District each fail differently. A single-brand contractor will sell you what they carry. We stock and install products from seven manufacturers so the material matches your roof, not our supply chain, and we offer GAF service in Burbank among those options.
Our crew rolls into Burbank before rush hour tightens up the 134 interchange. We’ve repaired scuppers, parapets, valleys, and vent boots on hundreds of roofs between the airport and the Verdugo Hills. What earns us repeat calls is the inspection-first approach. We’ll tell you when a repair buys you five more years and when it won’t. Ruben walks every completed job himself. That level of accountability is why Burbank homeowners refer us to neighbors on Chandler and Victory.
Styles & brands we work with
Shingle Roof Repair in Burbank
Shingle roof repair is the most common call we get from Burbank’s single-story ranches and early post-war tract homes. These houses were built with skip-sheathing or thin 1×6 decking under original asphalt shingles, and after seventy-plus years of San Fernando Valley sun, the shingles are often brittle and the decking underneath is compromised. A typical shingle patch job in Burbank, replacing 8-12 shingles and resealing the area, runs $425 to $780. Replacing an entire slope due to wind creasing or UV cracking runs $2,800 to $6,400 depending on square footage and whether the deck needs replacing too.
Shingle Replacement
When Santa Ana winds blow down the Verdugo foothills at 40 to 50 miles per hour, aging shingles lift at the nail line and crease. Once that seal breaks, water finds the underlayment. We match your existing shingle profile and color from GAF, CertainTeed, or Owens Corning stock, but we always check the decking beneath before laying anything new.
Vent Boot and Valley Repair
The valley is where two roof planes meet and channel the most water during Burbank’s winter rains. Failed valleys show up as ceiling stains inside the house, usually after the first heavy storm following a dry summer. Vent boots crack from constant UV exposure and let water drip along the pipe into your attic. Both are targeted repairs, not full-roof replacements. Valley resealing and flashing runs $580 to $1,050. Vent boot replacement runs $285 to $475.
Storm Damage Roof Repair in Burbank
Storm damage roof repair in Burbank follows a predictable rhythm: Santa Ana winds work on the roof from October through December, then winter rains expose every seam that wind opened. We respond to wind-lifted shingles, creased membranes, dislodged flashing, and ponding water that finds its way through scupper seams. The cost range is wider here because the damage varies. Minor wind-lift repairs start around $450. Storm damage that’s been sitting for a month and soaked through decking can hit $3,000 or more once rotted wood gets replaced.
Wind-Lifted Shingles and Membranes
Foothill homes above Magnolia and streets along the Verdugo slope face the strongest wind gusts. We see older low-slope membranes creased and torn at the seams, and shingles peeled back at the rake edges. The fix requires resealing the seam, replacing damaged decking if saturated, and adding mechanical fasteners where the original installation used only adhesive.
Scupper and Parapet Repair
Flat-roof homes and commercial buildings across downtown Burbank drain through scuppers cut into parapet walls. After drought-hardened summer soil shrinks and winter rain saturates it, debris clogs those scuppers. Water ponds against the parapet and works into the seam. We strip the failed membrane, replace the flashing, and often rebuild the scupper with an asphalt-based flashing membrane like GAF Liberty that bonds directly to the original structure.
Trusted Brands We Service in Burbank
Sunrise Roof Repair carries materials from seven top manufacturers, so your roof gets what it actually needs rather than whatever single brand we happen to stock. For Burbank’s flat and low-slope roofs, we regularly use GAF Liberty and CertainTeed Flintlastic for self-adhered membrane patches. For shingle replacements on the 1940s-60s ranches, Owens Corning Duration and CertainTeed Landmark match the existing profile better than anything else we’ve tried. We keep sealed stock for all three in our local supply rotation, which means faster turnaround when a Burbank roof opens up mid-repair and needs decking plus membrane the same day.
Common Roof Repair Problems We See in Burbank Homes
- Ponding at scuppers and parapet seams. Flat roofs built from the 1940s through the 1980s drain through scuppers that clog with leaves and debris after the first winter rain. Water ponds against the parapet and seeps through aging seams, which is the single most common flat-roof failure we repair in Burbank’s flats and Media District buildings.
- Skip-sheathing that fails underfoot. Original post-war homes often have skip-sheathing, meaning gaps between boards. When we’re on the roof for a minor repair, our crew sometimes finds the decking can’t safely support the work. That triggers a deck replacement, and in Burbank that means a permit and plan check.
- Santa Ana wind damage on the foothill slope. Homes above Magnolia and along the Verdugo-adjacent streets take direct wind off the mountains. Shingles lift, low-slope membranes crease, and ridge caps blow loose. The damage is often invisible from the ground.
- UV-degraded asphalt and single-ply membranes. Burbank’s summer sun is relentless. Asphalt shingles lose granules and crack after fifteen to twenty years of direct Valley exposure. Single-ply membranes on flat roofs get brittle and split at the seams. Early inspection catches this before a leak starts.
See the difference
Before
After
Before
After
Before
AfterPricing for Roof Repair in Burbank, CA
Here’s what a Burbank homeowner should expect on a written estimate. Shingle patch jobs run $425 to $780. Flashing repair around chimneys, skylights, or parapets runs $380 to $950. Vent boot replacement runs $285 to $475. Flat roof patches on built-up or modified bitumen roofs run $650 to $1,850 depending on square footage and membrane type. Full shingle replacement on a typical 1,100 to 1,400 square foot Burbank ranch runs $7,800 to $12,400, including decking repair if needed. Flat roof replacement on a 1940s-60s residential flat roof with new GAF Liberty or CertainTeed Flintlastic runs $9,500 to $16,000. The price moves when decking is rotted, framing is undersized, or the building department requires seismic upgrades. Our estimates are free and we’ll walk you through every line item. Call (877) 752-3460 to schedule one.
We Also Serve Cities Near Burbank
Our crews work throughout the east San Fernando Valley. You’ll find us in Burbank most days, but we also take repair calls from Universal City, North Hollywood, Glendale, and Studio City. Foothill homes in Glendale have similar wind exposure, and the flat-roof stock in Universal City shares the same scupper failures. If you’re within these areas, call (877) 752-3460 and we’ll get you on the schedule.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Burbank
Yes, in many cases. Burbank’s building department does its own plan checks rather than deferring to LA County, so any repair that involves replacing more than a set square of decking often triggers Burbank-specific seismic and wind-load requirements. That can mean engineering review, hold-down hardware, or framing reinforcement before the roof work gets approved. We handle the permit process for you and price any upgrades into the estimate before you commit. Call (877) 752-3460 and we’ll help you understand what your specific repair will trigger.
Flat roofs in Burbank fail at scuppers because that’s where ponding water sits longest after winter rain. Drought-hardened soil absorbs water slowly, and debris from Burbank’s mature trees clogs the narrow scupper openings. Water backs up against the parapet wall and works into the seam between the membrane and the scupper flashing. We see this on residential flat roofs in the 91506 area and on commercial buildings throughout the Media District. The repair involves resealing the seam, replacing the flashing, and often widening or cleaning the scupper itself.
Yes, Santa Ana winds regularly damage shingle roofs in the Verdugo foothills. Homes above Magnolia Boulevard and along the north-facing slope catch sustained 40-50 mph gusts that lift shingles at the nail line. Once the adhesive seal breaks, water gets underneath the shingle during the next rain. The damage is usually invisible from the street, which is why foothill homeowners benefit from an annual roof inspection. Call (877) 752-3460 to schedule one before the next wind event.
A square is 100 square feet of roof area, and it’s the standard unit for pricing shingles, membrane, and decking. If your roof is 1,200 square feet, that’s 12 squares. Full replacement quotes are priced per square, and decking replacement is billed per sheet once the existing roofing is removed. On repair jobs, the square rate only matters when the damage is extensive enough to warrant full slope replacement rather than patching. We’ll walk you through the square calculation on your free estimate.
No, we don’t replace wiring, and we’ll flag any framing concerns before touching it. On a 1948 ranch house near Magnolia Boulevard and Kenwood Street, our crew opened a low-slope roof to replace a failed scupper and found original skip-sheathing and 2×4 rafters that had been creased by Santa Ana winds. We installed new 5/8-inch plywood decking, a GAF Liberty self-adhered underlayment, and upgraded flashing at the parapet seams, then added a ridge vent to improve attic ventilation – all inspected and approved by Burbank’s building department before we closed it up. If we find wiring, we’ll tell you and recommend an electrician. Framing is different: Burbank’s plan-check process requires seismic and wind-load upgrades on many decking replacements, and we handle those with a licensed engineer. Call (877) 752-3460 with any questions about what your repair might uncover.
Schedule Your Free Roof Repair Estimate in Burbank
If you’ve got a stain on the ceiling, missing shingles after the last wind event, or a flat roof that ponds at the scuppers, don’t wait for the next rain. Ruben Acosta and our full Roof Repair crew are in Burbank throughout the week, from the airport flats to the Verdugo foothills. We inspect first, give you a written estimate, and only recommend replacement when repair genuinely won’t hold. Call (877) 752-3460 now to schedule your free estimate.
Written by Ruben Acosta, Owner at Sunrise Roof Repair, serving Burbank and the east San Fernando Valley with honest roof repair, replacement, and inspection.