Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Culver City
Roof replacement in Culver City rarely starts with the shingles or tile you can see. It starts with what’s underneath: the 80-year-old felt paper, the original 2×4 rafters, and the flashing that hasn’t been touched since the Roosevelt administration. Our crews work throughout 90230, 90231, 90232, and 90233, and we know what we’re going to find when we lift clay barrel tile off a 1930s Spanish Colonial Revival on a Carlson Park street. That’s why we inspect first and quote second. Call (877) 752-3460 to schedule a free roof replacement estimate in Culver City.
Why Sunrise Roof Repair Is Culver City’s Preferred Roof Replacement Company
Homeowners in Culver City call us because we don’t start by selling a full tear-off. Ruben Acosta built Sunrise Roof Repair around a simple rule: inspect honestly, recommend only what’s needed, and carry enough brands to fit the roof rather than forcing the roof to fit a brand. In neighborhoods like Carlson Park, Culver Crest, and Blanco Park, that approach matters. A 1931 clay tile roof doesn’t need a GAF architectural shingle. It needs the tile lifted, the underlayment replaced, and the original profile preserved. We do that work because we stock materials from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. Seven brands, one contractor.
Culver City homeowners repeatedly point to two things in reviews: we show up when we say we will, and we don’t pad the scope. When a roofer tells you a 1930s tile roof needs a total replacement before anyone has looked under the tile, that’s a sales tactic, not an assessment. We inspect first, recommend second. That’s how Roof Replacement should work, and we’re glad to be the crew Culver City trusts for it.
Styles & brands we work with
Roof Replacement Contractor in Culver City
A roof replacement contractor in Culver City has to understand that most homes here weren’t built for modern roofing systems. They were built in the 1920s through 1940s, framed with kiln-dried lumber cut to old standards, and roofed with clay barrel tile laid over felt that was never meant to last eight decades. When we take on a replacement, we’re often the first crew to open that roof since the original build, and what we find underneath shapes the real cost. A full roof replacement in Culver City typically runs $18,000 to $45,000 depending on material choice, roof size, and the condition of the decking and framing. Asphalt shingle replacement on a mid-sized home usually falls between $12,000 and $22,000. Flat roof replacement on mid-century flats and Hayden Tract-area buildings runs $10,000 to $28,000 depending on system type.
Full Roof Replacement
A full replacement means removing everything down to the decking, replacing damaged sheathing, installing new underlayment with ice and water shield in valleys and eaves, and laying the new roof system. In Culver City, this almost always triggers Culver City Building Safety code requirements that weren’t in place when the original roof went on. We factor those into our written quote before work starts, so the price doesn’t shift mid-project without your written approval.
Roof Decking Replacement
On older Culver City homes, the decking is often plank sheathing that’s warped, split, or rotted at the edges. When we lift tile or shingles and find decking that can’t hold a fastener, we replace only the affected sections and document every piece with photos. You see what we see, and you approve the added cost before we proceed.
Asphalt Shingle Roof Replacement in Culver City
Asphalt shingle roof replacement in Culver City is most common on 1950s and 1960s ranch homes in the Blair Hills and east-side neighborhoods, where original wood shake or early composition roofs are finally at end of life. These homes respond well to architectural shingles from GAF, CertainTeed, or Owens Corning, and a standard tear-off and re-roof on a 1,400 to 2,000 square foot home typically runs $14,000 to $24,000 in Culver City. The variables are decking condition, underlayment upgrades, and whether the home has any flat roof sections over additions or porches.
Architectural Shingles
Architectural shingles are the workhorse choice for Culver City homes because they hold up to intense summer UV without cracking and shed winter rain cleanly when the underlayment is done right. We stock a range of color profiles from multiple manufacturers, so the new roof matches the neighborhood’s character instead of standing out.
New Construction
For new construction and newer infill along the eastern edge of Culver City, we install complete roofing systems with proper ventilation, drip edge, and ice and water shield from day one. That’s a different kind of job: no hidden conditions, no surprises, just a clean build to current code.
Trusted Brands We Service in Culver City
Because we stock and install products from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, we can match the material to the home rather than pushing one brand on every project. A flat roof on a mid-century duplex in Crestview needs a different membrane than a tile roof in Carlson Park. That’s not a problem when you carry seven brands. If you need a specific Boral clay tile profile matched to your 1930s original, we can source it. If GAF architectural shingles fit your budget and your home’s style, we’ll quote that. The right material for your roof, not the only brand we carry.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in Culver City Homes
- Brittle felt underlayment under intact clay tile. The tile looks fine from the street, but the 80-year-old felt beneath it has turned to something that crumbles on contact. In Carlson Park and the original Culver Crest area, this is the single most common leak source we find.
- Undersized 2×4 rafters on 1920s and 1930s framing. Culver City’s original homes were built to standards that predate modern roof loads. When we open a roof and find rafters undersized for the span, we sister them before re-roofing, and we price that work in writing before proceeding.
- Missing ice and water shield in valleys and eaves. Original 1930s construction didn’t include it. Culver City Building Safety now requires it in critical areas. Once the roof is open, the upgrade gets triggered, and we plan for it in the initial quote.
- Flat roof membrane failures on mid-century flats and duplexes. On the 1950s and 1960s flat roofs along Sepulveda and near the Hayden Tract, ponding water and UV degradation lead to cracked membranes and ceiling stains. These roofs usually need full membrane replacement, not patching.
On a 1931 Spanish Revival in Carlson Park, our crew lifted the original clay barrel tile to replace failed felt underlayment, only to find undersized 2×4 rafters and no ice and water shield in the valleys, conditions we documented and priced before proceeding. We sistered the framing, installed new underlayment and drip edge, and re-laid the original tile to preserve the historic profile, all with written approval from the homeowner.
Pricing for Roof Replacement in Culver City, CA
In Culver City, a full tile roof replacement with new underlayment on a 1,500 to 2,500 square foot home runs $25,000 to $45,000. Asphalt shingle replacement on a comparable home sits between $14,000 and $24,000. Flat roof replacement on a mid-sized mid-century building runs $10,000 to $28,000 depending on membrane type. What moves the price: framing repairs the roof reveals, code upgrades Culver City Building Safety triggers once the roof is open, and whether your existing tile can be reused. We write those allowances into the contract up front, not afterward. Call (877) 752-3460 for a free estimate and a written line-item quote.
We Also Serve Cities Near Culver City
Our crews work throughout Culver City and the surrounding area, including Ladera Heights, Century City, Beverly Hills, and View Park-Windsor Hills. If you’re in one of those neighborhoods and need a roof replacement estimate, call (877) 752-3460. We’ll send someone who knows your local housing stock as well as we know Culver City’s.
Serving Culver City, CA — Our Local Coverage Area
We’re based in the Culver City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Culver City
Because the tile isn’t the waterproofing layer, the underlayment is; on 1920s and 1930s Spanish Revival roofs in Culver City, that underlayment is often 80-year-old felt that has turned brittle and failed, so water gets past the tile and through the paper. We fix this with tile-lift: we remove the original clay barrel tile, replace the felt, install new drip edge and ice and water shield if Culver City code requires it, and re-lay the original tile. Call (877) 752-3460 for a tile-lift evaluation and an exact quote, your estimate is free.
Yes, in most cases we lift and re-lay your original clay barrel tile rather than replacing it, which preserves the historic profile of your Culver City home and saves thousands in material cost. The scope is underlayment replacement, flashing repair, and selective tile replacement for any cracked pieces. Call (877) 752-3460 and we’ll tell you honestly whether your tile can be saved.
The three most common are brittle or missing underlayment, undersized or damaged framing, and rotted decking at eaves and valleys, all of which change the final price if they weren’t anticipated in the original quote. We write allowances for these conditions into every Culver City roof replacement contract, and we document everything we find with photos before any added work is approved. Call (877) 752-3460 to get a quote that anticipates what’s under your roof, not just what’s on top of it.
Culver City Building Safety requires ice and water shield in valleys and eaves on new roof installations, along with updated drip edge and ventilation, and we include those upgrades in our initial quote when we know they’ll be triggered. For older homes, those items weren’t part of the original build, but once the roof is open, they’re mandatory, so planning for them up front prevents a surprise change order. Call (877) 752-3460 and we’ll explain exactly what your roof will trigger when it’s opened.
You should compare scope, not just price; a quote that doesn’t include underlayment replacement, code upgrades, and framing allowances for your older Culver City home will force those costs on you later as change orders, while our written quotes include them up front. Look for itemized decking and framing allowances, a clear statement of what happens when the roof is opened, and written approval requirements for any added scope. Call (877) 752-3460 for a quote that’s built the same way we’d want one written for our own home.
Written by Ruben Acosta, Owner at Sunrise Roof Repair, serving Culver City since day one.