Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Burbank
Roof replacement in Burbank typically runs $12,000 – $28,000 for a standard single-story home, with most jobs completed in 3 – 6 working days once materials land. We serve every Burbank zip code – 91521, 91522, 91523, and 91526 – from the Verdugo foothills above Glenoaks to the flats near the 5. If your roof is failing, call (877) 752-3460 for a free estimate and we’ll give you a straight answer on repair versus replace.
Why Sunrise Roof Repair Is Burbank’s Preferred Roof Replacement Company
We’ve worked on enough Burbank roofs to know what the city’s permitting desk will and won’t accept before we strip the first shingle. Burbank runs its own building-department plan checks instead of deferring to LA County, so a roof replacement here is permitted and inspected against Burbank’s own seismic-and-wind criteria. That means the same shingle-and-nail schedule that passes in a county-permitted neighbor can get flagged at Burbank’s counter. We scope every job for that reality up front, so you’re not staring at a correction notice mid-project.
Our crews know the difference between a 1948 ranch on skip-sheathing near Magnolia Park and a 1970s apartment block off Burbank Boulevard. That’s not trivia; it changes how we price, what we re-deck, and which underlayment we specify. Ruben Acosta set this company up to be straight with homeowners about roof condition, not to steer every inspection toward a full replacement. When repair is the right call, we say so. When it isn’t, we show you why with photos and measurements.
Styles & brands we work with
Roof Installation in Burbank
Roof installation in Burbank means a complete tear-off and a new system built to this city’s own inspection standard, not a generic LA County spec. We pull the old roof down to the deck, rebuild or replace the sheathing where needed, and install new underlayment, flashing, and shingles or membrane. Most Burbank homeowners need this when the original post-war roof finally gives out or a Santa Ana wind event tears enough perimeter flashing that patching stops making sense. A full roof installation on a typical Burbank single-story runs $12,000 – $24,000 depending on roof size, pitch, and deck condition.
Decking and Underlayment
Older Burbank homes often carry original skip-sheathing or thin 3/8″ sheathing under roofs that were never meant to hold modern architectural shingles. We pull up the old material and check every deck before nailing anything down. If the deck flexes, we re-deck to solid OSB or plywood and lay ice and water shield through valleys and at eaves before the new roof goes on.
New Construction
For new builds and additions in Burbank, we install roofing on fresh framing, working from the plans the city already approved. That means coordinating with your framing crew on nailing schedules and sheathing gaps so the roof passes inspection the first time. We quote these jobs as a line-item scope, not a rough number.
Roof Replacement Contractor in Burbank
A roofer in Burbank is only as good as their relationship with the city inspection desk. Our Roof Replacement team knows what Burbank’s plan checkers look for: Seismic ties on re-decked roofs, drip edge fastened to the perimeter in wind-prone foothill zones, and scupper flashing that actually drains. When you hire us, you get a contractor who has already fixed the mistakes other crews made on Burbank permits. A typical Roof Replacement in Burbank runs $14,000 – $28,000 for architectural shingles, with flat roof membranes on the lower end per square foot.
Scope and Permitting
Every Burbank roof replacement we do gets permitted through the city’s building department, not LA County. We pull the permit, schedule inspections, and walk the job through to final sign-off. You get documentation that the roof meets Burbank’s own seismic-and-wind criteria. That matters when you sell the house.
Timeline and Sequence
On a standard Burbank single-story, we strip, re-deck, dry-in, and shingle in 3 – 6 working days, weather permitting. Flat roofs take a bit longer because the membrane needs clean, dry substrate and proper cure time at the seams. We sequence the tear-off so your house is never exposed overnight without a dry-in.
Trusted Brands We Service in Burbank
We stock and install products from GAF, CertainTeed, Owens Corning, and Boral, among others, so the material we recommend fits your roof and your budget rather than whatever we happen to have in the yard. Seven brands, one contractor, no brand-exclusivity agreements steering the quote. If your Burbank roof needs architectural shingles rated for Santa Ana winds, we’ll show you GAF Timberline or CertainTeed Landmark options side by side. If it’s a flat roof near the Media District, we’ll spec Boral or Owens Corning membrane. Material choice should be a decision, not a default.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in Burbank Homes
- Santa Ana wind lift on foothill roofs. Roofs above Glenoaks and the streets off Kenneth Road take wind that tears perimeter flashing and creases low-slope shingles. We fasten drip edge and perimeter courses to a 130-mph-rated pattern on those homes, because the city’s wind exposure maps demand it.
- Ponding at scuppers and parapets on flat roofs. The 1940s – 60s flats around downtown and the Rancho-adjacent blocks routinely fail at the same place: scupper and parapet seams after the first winter rain following a dry summer. The deck is drought-hardened, the drains are clogged, and water backs up under the membrane.
- Skip-sheathing under original post-war roofs. Many Burbank tract homes from the late 1940s and 1950s still sit on original 2x framing with gap-sheathing. New architectural shingles flex over those gaps, causing early underlayment failure unless we re-deck to solid sheathing first.
- Failed drip edge and fascia rot at low eaves. Burbank’s intense summer UV degrades older drip edge and fascia board along the eave line. When we strip a roof, we inspect and replace any rotted or rusted metal before the new shingle course locks in.
Pricing for Roof Replacement in Burbank, CA
You should never sign a roof replacement bid without knowing what the number is built on. Here’s what we’re seeing in Burbank right now:
- Full tear-off and architectural shingle replacement: $14,000 – $28,000 for a typical 1,400 – 2,200 sq ft single-story house.
- Flat roof membrane replacement (built-up or single-ply): $9,000 – $18,000 depending on roof size, membrane type, and parapet condition.
- Roof decking replacement (re-deck over skip-sheathing): $3,000 – $8,000 added to the job, depending on how much of the deck needs to be rebuilt.
- Flashing and scupper rebuild on flat roofs: $800 – $3,000 extra if the existing parapet and drain assemblies are compromised.
What moves the price: roof size and pitch, whether we’re re-decking, the brand of shingle or membrane you choose, and whether you’re in a foothill wind zone that requires upgraded fastening. Call (877) 752-3460 for a free estimate and we’ll walk your actual roof, not a satellite photo.
We Also Serve Cities Near Burbank
Sunrise Roof Repair handles roof replacement jobs across the San Fernando Valley and the northeast LA edge. We regularly work in Burbank, plus Universal City, North Hollywood, Glendale, and Studio City. If you’re in one of those areas and need a roof inspected or replaced, call us at the same number and we’ll schedule you in.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Burbank
Burbank permits its own roof replacements through the city’s building department, not LA County. We pull the permit, schedule the city inspection, and walk the job through to final sign-off. That local plan check means your roof is verified against Burbank’s own wind-and-seismic criteria, which are stricter in foothill zones than the county baseline.
Flat roofs in the downtown and Rancho-adjacent blocks pond at the scupper because the deck has been dried out all summer, the drains clog with wind-blown debris, and the membrane has lost flexibility under UV. Water backs up at the parapet seam and works under the membrane. The fix is rebuilding the scupper, clearing the drain line, and re-flashing the parapet before the membrane gets replaced. Call (877) 752-3460 for an exact quote on your roof.
Ask three things: whether the bid includes re-decking if skip-sheathing is found, whether the fastening schedule meets Burbank’s foothill wind requirements, and whether the contractor pulls the permit through the city. We answer all three in writing before we start. Most low bids in Burbank either skip the permit or skip the re-deck, and the homeowner pays for it twice.
Most 1940s – 50s Burbank tract homes need at least partial re-decking, because the original skip-sheathing or thin sheathing can’t support modern architectural shingles without flexing. We inspect the deck after tear-off and show you exactly what we found. The re-deck cost is itemized, not buried in a lump line.
Homes above Magnolia in the Verdugo foothills take Santa Ana winds that lift and crease low-slope roofs, so we upgrade the fastening: 130-mph-rated nailing patterns, heavier drip edge, and ice and water shield through the valleys. The same shingle on a flat-lot house downtown won’t survive upslope the same way. Call (877) 752-3460 and we’ll scope your roof for its actual wind exposure.
If your Burbank roof is nearing the end of its life or you’re seeing leaks, missing shingles, or wind damage, call (877) 752-3460 to schedule a free estimate. We’ll inspect first, recommend second, and give you a written scope with real numbers before you commit to anything.
Written by Ruben Acosta, Owner at Sunrise Roof Repair, serving Burbank and the San Fernando Valley.